Hello,
I wonder if SooperLooper has the feature of auto-fading a loop like the Echoplex Digital Pro has. When a loop is playing, its volume gradually diminishes after a predetermined period until audio vanishes completely.
If I remember correctly, on the EDP one would set up the feedback percentage and then start the loop. In my project I was using this feature as a coda, a final event on which I would walk away from stage leaving the loop finish its routine on its own.
I appreciate some advice on how to reproduce this feature with SooperLooper - thank you
Auto-fading a loop
Moderator: jesse
Re: Auto-fading a loop
Just found this note on SooperLooper's description at audio3ware:
"Feedback control allows gradual loop fading, active during overdub/multiply and optionally during playback"
Will try the feedback control reducing it from 100%, hope it works
"Feedback control allows gradual loop fading, active during overdub/multiply and optionally during playback"
Will try the feedback control reducing it from 100%, hope it works
Re: Auto-fading a loop
Yes, to get the feedback working "optionally during playback" you have to enable the "p. feedb" control for the loop. Then reducing feedback level will do what you're looking for.
Re: Auto-fading a loop
Well, p.feedb on playback works fine. But i didn't get the overdub played over main loop fade out....
I simply executed:
· "record" first loop
· overdub this sample with feedb control point to value 58%
What's wrong? the overdubed loop not vanishes....
Thanks
I simply executed:
· "record" first loop
· overdub this sample with feedb control point to value 58%
What's wrong? the overdubed loop not vanishes....
Thanks