I followed these instructions provided by Jesse viewtopic.php?f=10&t=103&start=0&st=0&sk=t&sd=a on how to setup SL within Live
(substitute MPD24 for my MIDI controller)- Add the SL AU plugin to a new audio track in Live.
- Create a new midi track and have it get its input from your MPD24
- Set the output for that midi track to go to the SL plugin on the audio track (it will show up in the menus when you set the output)
- Set the monitoring to be 'In' on both the midi and the audio track.
I have two MIDI tracks with AU instruments that output to the Audio track which SL is on, without problems at all. I record the first track, then the second/third etc sync to the first loop. There are no latency issues when using MIDI instruments, it works perfectly. However, if I use the SL audio track to record audio from a microphone into SL, there is always a slight delay with the recorded track (it seems to be about 20 or so milliseconds late). It loops fine, but of course the loop has a little delay.
Now, I need to set monitoring to Auto or In in order for SL to even record the audio. Supposedly you need to have monitoring off in order for the Driver Error Compensation to work. If I turn off monitoring, SL records no audio when I play.
My Buffer size is set to 128 samples.
So what could be going wrong here? Why would just the audio be out of sync? Do I need to add another audio track and Output that to the Sooperlooper audio instance?
Again, thanks for a great piece of software Jesse!
loopy