not reading timeclock from jack.

Problems getting SL up and running on Linux? Post here.

Moderator: jesse

Post Reply
rcrath
Posts: 3
Joined: Wed Feb 27, 2013 11:19 pm

not reading timeclock from jack.

Post by rcrath »

Problem:
1start qjackctl, start jack.
2. open sooperlooper, open hydrogen.
3. set "sync to"=jack/host, "quantize"=cycle, "sync"=checked
*expected behaviour: BPM in sooper looper should get set by jack. side note, hydrogen works on qjack jack transport at right speed, but qjack is not showing the bpm from hydrogen either.
Actual behavior: bpm stays at zero, and punching record with transport on or off results in "waiting start" meesage which never goes away.

Tried reinstalling all jack related items and sooperlooper.

Everything works fine with free timing.

Linux Mint LMDE. patched and up to date.
kasbah
Posts: 117
Joined: Tue Sep 06, 2011 7:01 pm

Re: not reading timeclock from jack.

Post by kasbah »

What version of SL are you using?
rcrath
Posts: 3
Joined: Wed Feb 27, 2013 11:19 pm

Re: not reading timeclock from jack.

Post by rcrath »

1.6.18
kasbah
Posts: 117
Joined: Tue Sep 06, 2011 7:01 pm

Re: not reading timeclock from jack.

Post by kasbah »

Have you tried it with jack1 and jack2?
rcrath
Posts: 3
Joined: Wed Feb 27, 2013 11:19 pm

Re: not reading timeclock from jack.

Post by rcrath »

only jack2, as I have some stuff I use regularly that requires it.
Post Reply