Search found 26 matches

by colinbrogan
Sat Mar 28, 2020 7:38 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Jesse, Thanks! Would I just do an OSC message as follows?: /set smart_eighths 0 Or is this something when I do in the command line when I fire up sooperlooper. Honestly, after thinking about it and messing around for a while, this may not be a bad feature, atleast, if one stick to the idea of quanti...
by colinbrogan
Sat Mar 14, 2020 6:01 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Eighth_per_cycle sometimes doubles itself without user input

It's been a long time, but I am back to working on this project again. If Jesse is around somewhere, I have a question for him which is stumping me. I noticed when sending "eighth_per_cycle" numbers via OSC to sooperlooper, such as "5" or "4", that Sooperlooper will som...
by colinbrogan
Mon May 20, 2019 6:02 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Alignwaivers: https://github.com/colinbrogan/broganheimer_edp4/ Make sure you are logged into to your username on Github, because it is private. It is still showing you as a collaborator, so you should be able to access it as long as you are logged in. In test_buttons.py, see this line: client.send(...
by colinbrogan
Sat Mar 30, 2019 7:36 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Gentlemen, Big steps. All components are mounted in enclosure but 1 (which should be easy, just need to find a place). Also, I got a 3d printer, and created custom enclosures for my LED rings. Mounted all loop channels (decided on 5, I couldn't make room for the 6th, but 5 is plenty). Wired everythi...
by colinbrogan
Tue Mar 12, 2019 10:38 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Been working on this thing every night for over a week. I won't go out with friends until it's done. Alignwaivers: I should be able to get you some audio samples, and describe things soon. So far, by initial tests, both seem very high quality. I had some noisy interference at first with the guitar p...
by colinbrogan
Sat Mar 02, 2019 6:58 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

alignwavers: The MCP23017 is for individual LED lights to toggle various Sooperlooper options. It might be overkill, however, I am fundamentally excited about the ability to change quantize settings on the pedal itself (possibly on the fly). This will make more sense once I finish the prototype. I a...
by colinbrogan
Sat Feb 16, 2019 8:08 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Updates: 1. New preamp soldered correctly, finally, and tested as working. 2. Also got in a new Audio Injector card, this time the $50 Octo (because I screwed up the first also by soldering). This card gives me 8 outputs and 6 inputs, so I can have an optional seperate output per loop (My guitarist ...
by colinbrogan
Sun Feb 10, 2019 1:09 am
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Screwed up my second batch of GPIO port expanders. Still horrible at soldering.
by colinbrogan
Wed Jan 30, 2019 12:54 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

alignwaivers: Coincidentally, I also have a Novation LaunchControl which I am using for SuperCollider, but not SuperLooper. Furthermore, your ws2812b LED strips have the same chip as my LED Rings, so the code and library dependencies should be interoperable. I just added you as a collaborator on git...
by colinbrogan
Sun Jan 20, 2019 5:07 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Happy to get some responses from everyone. I apologize for my delayed responses. I've been waiting to post again until I finish soldering and wiring everything in my new case. I cut and re-welded my steel channel, because the prior case design had terrible ergonomics. Here are some screenshots: 5674...
by colinbrogan
Fri Dec 14, 2018 8:23 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Overdub is like playback, but the whole thing is orange instead of green. It gets more interesting as the states get more sophisticated. When I hit multiply, the whole thing turns purple. Here it is near the end of the first loop (when it hasn't added another loop): multiply_before_adding_2nd.jpg Af...
by colinbrogan
Fri Dec 14, 2018 8:11 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Wanted to show you what I was able to pull off with your auto register events on loop position, and state changes. These are screenshots from a video, because it's harder to post a video than to do screenshots: I have an LED ring which visually represents what is going on with the looper. When I hit...
by colinbrogan
Fri Dec 14, 2018 7:49 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Jesse, Yes I did. Haven't posted in a while but I've made massive strides on this project, may have a finished prototype in a week or two. I don't have any technical problems at the moment related to SooperLooper. Was able to connect through Python (I just didn't understand the library at the time, ...
by colinbrogan
Sat Nov 24, 2018 9:04 pm
Forum: Linux Specific Troubleshooting
Topic: SL on raspberry pi freezes jackd
Replies: 3
Views: 24287

Re: SL on raspberry pi freezes jackd

In case anyone on this thread still has any interest in solving this problem, or if anyone else chances on this thread looking for a solution, I was able to get rid of this message. There are a few posts suggesting this problem can arise with hostname issues. Here is one such post: http://www.essej....
by colinbrogan
Sat Nov 24, 2018 9:00 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Ok, Scowering the forums, a few posts came up where "got xrun" problems we're solved by correcting hostname issues. Here is one such post: http://www.essej.net/slforum/viewtopic.php?p=40#p40 So the output of "hostname" on my machine is "sooperlooperpi". I changed out th...
by colinbrogan
Sat Nov 24, 2018 8:26 pm
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

I finished Milestone 2. I was able to get the LED rings to perform all sorts of tricks based on python code. I am now stuck on something with Milestone 3. Jackd and Sooperlooper fire up fine as a background process, and sooperlooper gives me no errors. However, if I try to fire up a python script to...
by colinbrogan
Sat Nov 24, 2018 8:10 pm
Forum: Linux Specific Troubleshooting
Topic: SL on raspberry pi freezes jackd
Replies: 3
Views: 24287

Re: SL on raspberry pi freezes jackd

Also looking for a solution to this. I am also on a Raspberry Pi, running a realtime kernel. I can launch Sooperlooper and jackd without the XRun error, but the second I try to connect to it with OSC via python, it gives me an infinite loop of the console outputting "got xrun". If anyone e...
by colinbrogan
Sat Nov 24, 2018 12:24 am
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

Re: EDP Clone - A Raspberry Pi Project

Ok, I got through a few stages. Finally got a stomp switch wired into the Raspberry Pi and triggering Python code. Also got the LED rings controllable in python. led_ring_and_stomp_switch.jpg Also, as promised, here is an image of my enclosure with my foot in the shot for size reference: enclosure.j...
by colinbrogan
Sat Nov 24, 2018 12:07 am
Forum: MIDI Setup
Topic: EDP Clone - A Raspberry Pi Project
Replies: 8
Views: 32777

Re: EDP Clone - A Raspberry Pi Project

I've migrated this thread to "Alternative GUI's", because I think it is a more appropriate place for this sort of thing. Also posting new developments there. See below:
viewtopic.php?f=21&t=4972&p=7192#p7192
by colinbrogan
Sat Nov 24, 2018 12:01 am
Forum: Alternative GUIs
Topic: EDP Clone - A Raspberry Pi Project
Replies: 36
Views: 101480

EDP Clone - A Raspberry Pi Project

Updated 3/24/2020: Finally updating this post after nearly a year. Been working on this project off and on, and it has come very far along! kraken_proto_1.jpg The Project: The goal is to create a self-contained loop pedal, running Sooperlooper on a Raspbery Pi 3 Model B+. A pedal which requires no ...
by colinbrogan
Tue Nov 13, 2018 3:23 am
Forum: Looping Techniques
Topic: Why Insert?
Replies: 1
Views: 11893

Why Insert?

This is more of a philosophical question then a technical question. I am in the middle of building a physical stomp-box for sooperlooper which runs on a RPi. I've been trying to wrap my head around the original echoplex stompbox design, as I decide how to design my own stompbox, and I am scratching ...
by colinbrogan
Sun Nov 04, 2018 7:38 pm
Forum: MIDI Setup
Topic: EDP Clone - A Raspberry Pi Project
Replies: 8
Views: 32777

Re: EDP Clone - A Raspberry Pi Project

OK, I am glad this forum is not dead, and that I am getting responses. I got my parts in, along with my 2" x 4" x 18" steel channel (for the pedal case). Will send pics of the box as soon as I can, I am happy with the size and the ergonomics of a very wide pedal enclosure. I don't wan...
by colinbrogan
Fri Oct 26, 2018 5:00 pm
Forum: MIDI Setup
Topic: EDP Clone - A Raspberry Pi Project
Replies: 8
Views: 32777

Re: EDP Clone - A Raspberry Pi Project

One more update: Playing around with the Midi bindings in Sooperlooper last night, it appears that there is only a single-direction of control, from midi interface to Soolooper. This would mean that with an RPI + Arduino as midi server setup, one could not populate looptime or control the LED lights...
by colinbrogan
Fri Oct 26, 2018 4:28 pm
Forum: MIDI Setup
Topic: EDP Clone - A Raspberry Pi Project
Replies: 8
Views: 32777

Re: EDP Clone - A Raspberry Pi Project

Screen Shot 2018-10-26 at 3.29.13 PM.png There is this guy, who spearheaded a similar-ish project: http://journeytounknownsoundscapes.blogspot.com/2015/05/a-new-looper-in-town-raspberry-pi-with.html However, he is doing a TouchOSC project, which I find inconvenient for guitarists who don't usually ...
by colinbrogan
Fri Oct 26, 2018 3:59 pm
Forum: MIDI Setup
Topic: EDP Clone - A Raspberry Pi Project
Replies: 8
Views: 32777

Re: EDP Clone - A Raspberry Pi Project

I can get answers to technical questions by other means. However, if there is anyone left around with opinions about the ideal design (I mean in a non-technical sense. Like the question: "If you could wave a genie wand and your ideal headless switch / led / control layout for Sooperlooper appea...